The $15 Ceramic Diver

May 26, 2013

From the unpublished archives. This blog was written in May of 2013

FOR the past few months, watchgeeks have been gushing over Sottomarino watches. This, the house brand of the retailer Precision Time who have both a chain of brick and mortar stores and an Internet retail presence. It seems to be treading in the TV brand space with oversized cases and inflated MSRPs.

Precision Time routinely runs specials on the Sotto brand with deep discount sales sweetened with coupon codes. It was one of these scenarios that was too good to pass up: the Ceramico on a rubber strap for $15. Two things stood out at this price; a ceramic case and a sapphire crystal. I figured it would be something to write a review about and for the price and materials would be a great summer beater. Perfect for shade tree mechanical jobs, yard work and eating sand later in the summer as the surf smashes me into the beach.

It took about five days to reach my mailbox. It shipped in a large, tin case similar to what you see with Fossil but with a hinged lid. as i opened it, I was initially taken back by the high-end look. Nice finishing, a clean aluminum bezel ring with sharp fonts and nice clean dial details. The first thing I noticed when pulling it out was the weight. As this is a ceramic watch I was expecting it to be a lot lighter until I got a good look at the caseback.

20130601-001256.jpg

Where to start…

The Case. The face and side of the case looks great. It is a matte finish ceramic that is very pleasing to the touch. But flipping it over reveals that the case construction is actually two pieces – the stainless steel bottom of the watch with the ceramic fitting over it like a shell. The finish between the two case pieces is night and day. The stainless steel base is rough and poorly finished; this in sharp contrast to the well crafted ceramic top. The edges are super sharp and the tolerances are terrible with uneven gaps between the caseback and the surrounding ceramic top. Immediately the spell was broken. This was not much different than those Chinese switchblades at the flea market that seduce from afar and reveal their true hackiness up close.

Matte ceramic also has an odd quality in that when it gets covered in sweat and dries, it looks like the thing is covered in boogers.

20130526-164331.jpg

The Bezel. With any dive style watch, a unidirectional bezel is pretty much the standard and the Ceramico is no exception. The clicks were solid with none of the sloppiness one would expect in a cheap watch. That was until I rotated it about a quarter turn and it immediately seized. It was then that the overall flawed bezel design became apparent as it is much too thin to be adequately manipulated with wet or dirty hands. I literally had to work it for several days to get it to reliably move through an entire one hundred degree rotation.

The Crown.

20130601-092956.jpg

Here’s one from the spring that i never got around to publishing. I ended up replacing the terrible silicon band with a Panerai style leather band. Even with all of the flaws, this thing has taken a ton of abuse and keeps time. It looks pretty good in the wrist and has become my beater work watch.

As I went to unscrew the crown to set it, something seemed wrong. It felt like it was cross threaded. When I looked closely I found that it wasn’t centered properly into the case and that it was actually rubbing against the lower crown guard. Yet another detail missed.

The Dial. I can put up with a lot of flaws on a watch but an uncalibrated, inaccurate second hand drives me crazy. Couple that with haphazard dial markers and lume that’s worse than Invicta’s proprietary Tritinite and you’ve got a real mess. My biggest peeve is that the minute markers do not seem to be equidistant.

20130601-161234.jpg
Interestingly enough, the hands have a great matte silver finish and are three dimensional.

The Strap and Buckle.

20130601-164252.jpg
The silicone strap is okay but has proven to be a lint magnet. The buckle is nice and solid in a style reminiscent of Panerai.

The Crystal. This is actually the best feature of this watch. Very solid and thick and it has taken quite a beating. As expected, the optics distort the as it is viewed from the edge.

For $15, I kinda except all of the flaws. The retail of $399 is laughable. Even an Invictard would not put up with all of these issues from a yellow boxed behemoth. I’ve worn this thing to do a lot of manual labor and dirty jobs and knocked the hell out of it. It looks exactly as it did when I got it six weeks ago. Granted, it’s analogous to a really attractive woman with crossed-eye.

Advertisements

BACK in the 90’s a trend exploded where women started collecting miniature shoes. They were scaled quarter sized replicas of high heels and flats. Most that I saw appeared to be injection molded. They were sold along with tiered display shelves and seemed just the right thing for a stay-at-home wife to waste her husband’s money on.

At the time I remember thinking, “Why in the fuck do you want a replica shoe; why not just buy an actual pair of shoes and wear them?” It just made no goddamned sense to me.

Soon, they started appearing in dollar stores as grotesque and poorly executed caricatures of the original miniature shoes. Sound famiar?

As the Internet was in its AOL infancy, I don’t think there was a big collector market and so assume at some point these things got boxed up and put in the attic next to the glass blown French poodle vases and giant wooden forks and spoons.

Miniature furniture soon followed. And to be honest, this made a bit more sense to me as these were icons of mid-century modern designs; like the Eames lounge and Noguchi coffee table in 1/3 scale. At least these were specific, identifiable things. Are there really iconic shoes?

ENTER 2013 and the brilliant minds at Invicta Watch Company and their soon to launch line of miniature watches:

20130308-063434.jpg

Yep.

Miniature watches.

The model that they are based on is the “Venom” which has a bunch of snake cues. I’m sure these will look bitchin’ staged next to the “pure oriental” Ninja sword sets of a Katana, Wakizashi and Tanto that Watchgeeks long ago bought from the late night, infomercial-as-homeshopping channel Frost Cutlery dicks.

But these may be purely functional for some. Seeing that so many Invicta fans have such chunky wrists, they seem to weigh in well over 400 lbs. These would be perfect rings on such a ham hand. If they are going to have to cut the wall out of your bedroom to get you to the hospital, you should be swagged out.

These would also be a great first watch for an infant. One would look hard as hell on a chubby newborns wrist; complemented by an Italian horn charm necklace. And how goddamned cute would it be if daddy and baby had matching Venoms?

WHILE attempting to figure out who will be producing Jim Skelton’s yet to be launched watch brand, I can across some brand new Invicta trademarks.

As if the Sea Hunter, Sea Spider, Sea Thunder, Sea Excursion and Sea Wizard wasn’t enough ocean inspired insipidness, welcome yet another dive inspired fashion watch family: the Sea Bird. As this is only a name in that same, tired serif font, there are no designs to yet share.

Might I suggest the Sea Men as the next in this fine lineage?

I wonder if Eyal actually pays for someone to come up with this shit or if it gives his wife something to do? I mean whose bright idea is “JT FOR INVICTA, TOWER OF STRENGTH” – what does that even represent? They apparently plan to make key chains, jewelry, watch boxes and cases with this branding.

WE also can see that Invicta appears to be diversifying with an interesting application for the trademark PowerPatch which covers a range of potential products that including battery packs for handheld electronics,I’d assume smart phones, stands and cases. This move sort of makes sense as they’ll now be able to sell all of their most rabid fans phone cases that match their favorite watches. Okay, that sounded a lot better when it was just a thought rolling around in my head. Reading it out loud and it sounds pretty goddamned dumb – but hey Invictard reality is not like mine so what do I know.

BUT what I find really intriguing is the trademarking of two different sets of map coordinates. So I pasted them into Google Maps.

The first, 47.1070N, 6.8246E, resolves to an apparent paper street and set of stairs near a Swiss address, Rue de Beauregard 7, 2300 La Chaux-de-Fonds, Switzerland.

20121012-145634.jpg

I have been unable to determine what is at the address in question but I wonder if this might be an office of the company.

THE second trademark is 26.0280N, 80.1698W. This resolves to Invicta World Headquarters in Hollywood Florida:

20121012-150725.jpg

Why in the world would Invicta trademark map locations?

Invicta to Acquire Renato?

February 2, 2012

DANIEL Mink has be lying lower than the Chi as it goes on 9 months with the undelivered Tourbillon that turned into an advanced order. Mink has stalled on a big announcement and has outright ignored complaints and threats from disgruntled customer on their ignored Facebook page.

Michael Davis, Invicta Watch Company’s Technical Brand Manager, just this morning posted on his Facebook that a big announcement will be made tonight on Larry Megan’s web show. Now “Big Announcements” from Invicta are a dime a dozen, but interestingly enough, Koi from the watchlords forum has a source who has told him that Renato has been sold and that Invicta bought up the Tourbillons that Mink couldn’t afford.

UPDATE 11:20 PM: So the big announcement is actually that Michael Davis is getting his own webs how? Jesus, these Home Shopping TV guys are like the rap moguls that run their labels out of the parents basement. Move over Skelton – Davis After Dark is here to challenge you on LiveStream. Watch the throne!

I still wonder if an Invicta takeover of Renato is eminent. I hope so – I wanna buy Renatos at JC Penny and Costco.

May that big announcement be that Renato has ‘joined’ the Invicta Watch Group?

FIFTEEN years ago, I really believed that the strides being made in CAD and CAM would result in an on-demand future rapidly prototyped into physical being. A future where designers would be king and a lot of products would be produced and assembled locally leading to a new wave of industrial revolution and infinite customization.

And while on-demand is not as pervasive as i thought it would be, companies like rvndsgn are halfway there. Industrial designer Zach Raven began his project to create the world’s first rapidly prototyped timepiece with the help of a Kickstarter campaign to finance his initial pieces. It has been less than a year since he kicked off his campaign and he is already taking orders.

rvndsgn utilizes Selective Laser Sintering to create their cases; they are literally printed and built layer upon layer. Stainless steel powder is converted into solid cross-sections by a CO2 laser until a solid, three dimensional case is formed. Bronze is infused into the steel to replace the binder used in the printing process. It is nickel free so the finished product is allergy free. Final finishing occurs by tumbling the cases in husks to remove any sharp edges leaving a grain pattern behind that is unique to each piece as a result of the sintering process. It makes for a look that strikes me as organic; almost like the hives built by paper wasps. As a fan of the Japanese Mokume technique and the classic, organic designs of Isamu Noguchi, I find it aesthetically appealing.

The cases are manufactured in The Netherlands and measure a modest 40mm across. In these austere times this is a nice break from the pie plate sized watches that some brands would have you believe are the new normal. Any color finishes are applied over the stainless by the same company that creates the cases.

The dial is created in New York using a similar rapid prototyping method but materials are nylon and acrylic. The movement holder is incorporated into the face creating a single piece design.

Final assembly takes place in Grand Rapids, Michigan on a made to order basis. Delivery can take anywhere from 6 to 8 weeks on US orders.

20120131-213134.jpg

The bands and buckles are sourced from Italy and are a single piece, in form very similar to the G10 style. They pass through the case and could easily be replaced with a 20mm NATO or Zulu.

THE only downside to me is that it has a quartz movement – the Swiss Ronda 513. I prefer automatics. While Mr. Raven doesn’t have plans for an auto, he has assured me that he does have plans for additional styles that could accommodate an automatic movement. This illustrates one of the unique aspects of his method: there is no tooling to change. He just alters the measurements in the CAD file and produces it.

Mr. Raven is also looking to leverage his product toward a greater good:

I’m looking into doing a limited edition with a partnership with a large charity with the profits going to them.

rvndsgn started accepting orders as of last Friday with the exception of the all black and all white pieces. They are priced at $275 and shipping on both domestic and international orders is included in the price.

For more information, check out the rvndsgn website: http://rvndsgn.com/RVNDSGN/Home.html

20120201-200536.jpg

Wonder if the guy is still making value pays on these Invictas?

By Austin L. Miller
Staff writer
Published: Tuesday, January 17, 2012 at 10:18 a.m.

OCALA – Wrist watches worth approximately $10,000 were reported stolen from an Ocala home Monday.

Officers responded to the 1900 block of Southeast Lake Weir Avenue, where the homeowner told them he left the residence around 9:45 a.m. and returned two hours later and saw that the back door had been kicked in.

The man told Ocala police officers that 20 wrist watches were missing, the majority of which were of the Invicta brand.

A K-9 police dog and handler searched the area, but did not locate any suspects http://www.ocala.com/article/20120117/ARTICLES/120119719

.

SOME people have turned over stones regarding Invicta Watch Company claims; Koi of watchlords has rolled over a boulder.

It turns out Invicta’s Technical Brand Manager, one of three faces of the brand on ShopNBC, is also a graduate of con college! Mr. Davis was convicted of aggravated robbery in Montgomery County, Ohio in June of 1984.

Aggravated robbery is defined as “the taking of anything of value belonging to another from the person of another or that is in the immediate control of another when the offender intentionally inflicts serious bodily injury.”

I know what you’re thinking; “What’s serious bodily injury?”

It is defined as “bodily injury which involves unconsciousness, extreme physical pain or protracted and obvious disfigurement, or protracted loss or impairment of the function of a bodily member, organ, or mental faculty, or a substantial risk of death.”

He was sentenced from 5 to 25 years. Who knew Davis was living a thug life( like Tupac thug life?! While he may have been a badd ass on the streets, Mr. Davis appears to have been a model prisoner as he served only 53 months and change, completing parole in 1990.

I’M of the opinion that the man served his time and this was nearly a quarter century ago, and in recent years is only guilty of being a jagoff; Michael “fuckin” Davis deserves a second chance.

But its still funny to find stuff like this in light of Mr. Davis preaching about “hater” sites and people making things up – especially from a convicted felon.